Wash Oil is applied to control the build up of polymers on cracked gas compressor turbines, seals, intercoolers, and heat exchangers, wash oils are typically injected into ethylene crackers on a continuous basis or on regular intervals. Wash oil has a fairly high initial boiling point (>150 Deg C) so that it won’t immediately flash to vapor, combined with a high aromatics content (>90%) for dissolving polymeric compounds.
TECHNICAL SPECIFICATIONS
Sr. No. | CHARACTERISTICS | GRADE – Light | GRADE – Medium | GRADE – Heavy | UNIT |
---|---|---|---|---|---|
1. | Color | 0.0 – 0.5 | 0.5 – 1.0 | 2.0 – 3.0 | ASTM |
2. | Appearance | Clear liquid | Clear to slightest pale liquid | Clear to pale liquid | Visual |
3. | Density 30°C | 0.88 – 0.93 | 0.93 – 0.98 | 0.98 – 1.03 | gm/ml. |
4. | Flash Point | 64 Min | 93 Min | 125 Min | °C |
5. | Aromatic Content | 60 – 99 | 60 – 99 | 60 – 99 | % |
6. | K. Viscosity @ 37.8°C | 1.5 – 2.5 | 2.5 – 3.5 | 4.5 – 5.5 | Cst |
7. | Boiling Range | As under | As under | As under | As under |
7A. | Initial Boiling Point | 175 Min | 210 Min | 230 Min | °C |
7B. | Dry Point | 230 Max | 310 Max | 360 Max | °C |
8. | Gum Content | 10 – 25 | 10 – 40 | 10 – 40 | mg/100ml |
9 | Sulfur Compound | 1 – 50 | 1 – 50 | 1 – 50 | ppm |